Two-Post Ground-Plate Lift 5T - Speed Lifting Kenya
Car Lifting Equipments › Hoisting Equipment

Two-Post Ground-Plate Lift 5T

In Stock · SKU SL-TPL4B
KSh 560,000.00

A 5-Tonne (5,000 kg / 11,000 lbs) Two-Post Lift is a heavy-duty commercial workhorse designed specifically to lift large vans, long-wheelbase commercial vehicles, heavy SUVs, and trucks while remaining versatile enough for standard passenger cars.

1
Chat on WhatsApp for a bulk quote →

Description

A 5-Tonne (5,000 kg / 11,000 lbs) Two-Post Lift is a heavy-duty commercial workhorse designed specifically to lift large vans, long-wheelbase commercial vehicles, heavy SUVs, and trucks while remaining versatile enough for standard passenger cars.

Structural & Configuration Options

  • Clear-Floor (Baseless) Design: The hydraulic lines and equalization cables run through an overhead gantry beam. This leaves the floor completely unobstructed, allowing transmission jacks, oil drainers, and tool trolleys to roll freely underneath the vehicle.
  • Baseplate Design: The posts are connected by a low-profile steel plate on the floor which houses the chains and cables. This is the ideal setup for workshops with low ceiling clearances that cannot accommodate a tall overhead beam.
  • Wireless Multi-Motor Systems: Premium high-end models utilize separate motors on each post synced via dedicated Wi-Fi networks. This provides a completely clear floor and unrestricted overhead clearance simultaneously.
  • Symmetric vs. Asymmetric Columns:

oSymmetric setups feature columns facing each other directly with equal-length arms, distributing weight 50/50 for optimal stability on long, heavy commercial trucks.

oAsymmetric setups rotate the columns slightly and use shorter front arms, shifting the vehicle backward so technicians can fully open the front doors for interior or diagnostic work.

Lifting Performance & Arm Engineering

  • 3-Stage Telescopic Arms: To handle the massive weight and size variation, 5T lifts typically use triple-extending (multi-stage) arms. They retract short enough to reach the lifting points of a compact car and extend long enough (often up to 1800mm) to safely balance long-wheelbase vans.
  • Low-Profile Pick-Up Height: Despite their massive capacity, the arms have a low minimum profile (ranging from 90mm to 120mm) to slide easily under low-clearance vehicles or performance cars.]
  • Screw-Up Pads & Lift Extensions: Lifts feature heavy-duty rubber screw pads to adjust height precisely. They include modular pad extension kits (typically 70mm to 140mm) to reach deeply recessed chassis frames on large SUVs and trucks.
  • Automatic Arm Restraints: When the lift is on the floor, the arms swing freely. As soon as the carriages begin to rise, an automatic mechanical lock engages to prevent the arms from shifting under heavy load.

Hydraulic & Power Specifications

  • Twin Hydraulic Ram Drive: Utilizes heavy-duty direct-drive or dual chain-driven hydraulic cylinders in each column for smooth, synchronized ascending and descending.
  • Electrical Configuration Options: Manufacturers typically build these units with two power options depending on your workshop's grid:

o1-Phase (240V): Suited for standard commercial buildings or busy home workshops.

o3-Phase (415V): Preferred for high-frequency industrial environments, delivering faster lifting cycles and higher motor efficiency.

  • Low-Voltage Control System: Operating buttons and control panels utilize a safe 24V circuit to protect the technician from high-voltage shocks.

Safety Systems

  • Electronic Lock Release: Modern 5T lifts feature an automatic electric locking mechanism. Safety locks automatically click into place as the lift rises. Lowering the vehicle is a simple single-button operation where the solenoids automatically disengage the locks—eliminating the need to manually pull dual release cables.
  • Roof Protection Sensor: On clear-floor models, a padded safety shut-off bar spans the top beam. If a tall van or lifted truck makes contact with the bar, it instantly cuts power to the motor to prevent the vehicle's roof from crushing.
  • Velocity Safety Valves: Hydraulic cylinders are fitted with parachute valves or drain-back restrictors. In the rare event of a sudden hydraulic hose rupture, these valves restrict fluid escape, preventing a sudden collapse of the lift.
  • Anti-Toe Traps & Curtains: Structural guards around the base of the columns prevent technicians from accidentally catching their feet beneath the lifting carriages as they approach the floor

Specification

Specification CategoryParameterTypical Standard Value
Specification ParameterStandard Value / RangeEngineering Purpose
Lifting Capacity5,000 kg (5.0 Tonnes / 11,023 lbs)Safely lifts long-wheelbase vans, commercial trucks, and SUVs.
Maximum Lifting Height1,900 mm – 2,050 mmProvides ample under-car standing clearance for tall technicians.
Minimum Pad Height90 mm – 110 mmLow-profile clearance to slide under sports cars and lowered vehicles.
Lifting Time50 – 60 secondsHigh-efficiency hydraulic pump speed for rapid vehicle servicing.
Lowering Time40 – 50 secondsControlled gravity-down speed, regulated by hydraulic restrictors.
Motor Power Rating2.2 kW – 3.0 kW (3.0 – 4.0 HP)Heavy-duty industrial motor required to drive the twin hydraulic rams.
Power Supply Options1-Phase (220V/240V) OR 3-Phase (380V/415V)Configurable for high-frequency industrial shops or standard grids.
Control Circuit Voltage24V Low VoltagePrevents operator shock hazards at the push-button control box.
Hydraulic Working Pressure180 – 200 Bar (2,600 – 2,900 PSI)High-pressure threshold to guarantee steady, non-jerky ascension.
Oil Reservoir Capacity10 – 12 LitresTypically uses ISO 32 or ISO 46 premium anti-wear hydraulic oil.
Structural Dimensions & Workspace Requirements
Dimension ParameterClear-Floor (Overhead Gantry)Baseplate (Low-Ceiling)
Overall Structural Height4,200 mm – 4,450 mm2,850 mm – 2,900 mm
Overall Outside Width3,600 mm – 3,850 mm3,550 mm – 3,750 mm
Drive-Through Clearance Width2,750 mm – 2,900 mm2,650 mm – 2,800 mm
Width Between Columns3,100 mm – 3,300 mm3,000 mm – 3,200 mm
Minimum Ceiling Height Required4,500 mm clearance3,100 mm clearance
Concrete Floor RequirementsMinimum 150mm depth, 3,000 PSI reinforced steel mesh concrete.Minimum 200mm depth, 3,000 PSI reinforced concrete (requires deeper slab due to floor leverage).
Arm Configuration & Extension Reach
ParameterSpecificationFunctional Benefit
Arm Configuration TypeSymmetric (Equal length) or AsymmetricSymmetric offers maximum balance for trucks; asymmetric allows vehicle door opening.
Arm Design3-Stage Telescopic (Triple extending)Retracts tightly for short wheelbases; stretches out for extra-long delivery vans.
Front Arm Extension Range850 mm – 1,800 mmBroad range ensures proper engagement with uneven chassis lifting points.
Rear Arm Extension Range850 mm – 1,800 mmReaches deep under heavy rear axles to ensure center-of-gravity balance.
Pad Height Adjustment0 mm – 60 mm (Threaded screw pads)Fine-tune contact height before committing to the lift.
Lift Pad Extension Adapters70 mm & 140 mm drop-in stack sleevesReaches past running boards, side steps, or deep truck frame brackets.

Related Products

Four Post Lift 4 .5 T - Speed Lifting Kenya
Contact for availability
Four Post Lift 4 .5 T

A standard 4.5-tonne (4,500 kg) four-post automotive lift features a heavy-duty electro-hydraulic design built for general servicing, repairs, and wheel alignment in commercial or professional garages

Four post Heavy Duty 20 tonne truck lift - Speed Lifting Kenya
In stock
Four post Heavy Duty 20 tonne truck lift

A 20-tonne (20T) four-post lift is a heavy-duty commercial vehicle hoist engineered to elevate massive fleet assets, including multi-axle trucks, commercial buses, agricultural machinery, and heavy construction vehicles. At this high-capacity tier, these lifts feature specialized structural engineering, powerful drive systems, and multi-layered safety mechanisms to handle immense structural stress safely

Single Post Lift Normal 4T-Pheumatic or Hydraulic - Speed Lifting Kenya
Contact for availability
Single Post Lift Normal 4T-Pheumatic or Hydraulic

The Roadbuck Single Post Car Lift (Model X-100) is a space-saving, heavy-duty lifting system engineered specifically for car wash under washes, detailing bays, and quick-service operations

Opens a panel to chat with norbert on WhatsApp at +254 722 748 726