Battery Charger 150A
A 150A automotive battery charger is a heavy-duty workshop tool designed to fast-charge 12V or 24V lead-acid, AGM, and gel batteries, as well as provide an emergency 150-amp engine jump-start for cars, trucks, and SUVs.
Description
Battery Charger 150A
A 150A (ampere) battery charger is a heavy-duty, dual-purpose device designed to quickly charge, maintain, and deliver a high-amperage peak engine start for cars, trucks, SUVs, RVs, and workshop equipment
Core Features
- 150A Engine Start: Delivers high momentary amperage to jump-start drained or dead vehicle engines.
- Boost Mode: Includes a lower-amperage boost setting (typically 20A to 25A) to safely revive deeply discharged batteries before switching to normal charging.
- Multi-Stage Charging: Many modern units use an automated 6-step or microprocessor-controlled cycle to optimize charging speed and prevent overcharging. Simpler manual versions offer a timed control switch (such as a 135-minute timer).
- Battery Compatibility: Works with standard WET lead-acid, AGM, GEL, deep-cycle, and select Lithium (LiFePO4) batteries depending on the specific model.
- Built-in Safety Protections: Equipped with reverse hook-up/polarity protection (prevents sparks if clamps are flipped), short-circuit protection, and thermal/temperature overload protection to stop overheating.
- Monitoring Displays: Features either an analog ammeter or a digital display screen to track real-time voltage, amperage output, and charge status.
- Rugged Build: Built with heavy-duty metal housings, sturdy clamps, and often wheels or retractable handles for portability in workshops
Specification
| Category | Specification | Typical Range / Standard Value |
|---|---|---|
| Pressure Range | Operational Inflation Range | 5 to 145 PSI (0.3 to 10 Bar / 35 to 1000 kPa) |
| Maximum Inlet Supply Pressure | 175 to 218 PSI (12 to 15 Bar) | |
| Accuracy | Measurement Precision | ±0.3 PSI to ±0.5% of full scale |
| Display Resolution | 0.1 PSI / 0.01 Bar / 1 kPa | |
| Electrical | Power Supply | 100–240V AC (50/60 Hz) or 12V DC options |
| Power Consumption | 10W to 15W maximum | |
| Flow & Speed | Inflation Flow Rate | 400 to 2,500 L/min @ 145 PSI (dependent on compressor) |
| Environmental | Operating Temperature | -10°C to +50°C (14°F to 122°F) |
| Ingress Protection Rating | IP44 (Standard) to IP66 (Heavy Weatherproof) | |
| Hardware | Hose Length / Connection | 7.6 m to 10 m (25 to 33 ft) standard; extendable up to 50 m |
| Chuck Type | Open-end single/twin hold-on or clip-on chuck | |
| Enclosure Material | Die-cast aluminum, stainless steel, or high-impact ABS | |
| Dimensions | Average Unit Size | ~250mm x 250mm x 90mm (excluding hose) |
| Average Weight | 3.5 kg to 5.5 kg (unit only) |
Related Products
Automotive A/C leak detectors are electronic or specialized tools designed to quickly and accurately sense refrigerant gases or tracer elements escaping from a vehicle's air conditioning system.
A fully automatic car air conditioner (A/C) gas recovery and charging machine is a specialized workshop device that automates the entire loop of vehicle climate control maintenance.
An automotive AC manifold gauge set is a vital diagnostic tool used by technicians and DIY mechanics to monitor pressures, troubleshoot leaks, and safely recharge or evacuate a vehicle's air conditioning system